Weak Grid Test Fixture
Simulates weak-grid conditions such as high network impedance, voltage/frequency fluctuation and three-phase imbalance to verify the grid adaptability of inverters and converters.
Descripción general
The weak grid test fixture is a special testing device that simulates weak-grid conditions such as high distribution-network impedance, voltage/frequency fluctuation and three-phase imbalance, verifying the grid-connected adaptability of inverters and converters. It is mainly used for pre-grid-connection compliance testing and R&D verification of new-energy equipment, and can set different ratios of short-circuit capacity to equipment capacity (SCR = 1.0–10) to reproduce a low-SCR grid environment.
Aplicaciones
- Compliance testing of new-energy grid-connected equipment
- Inverter weak-grid adaptability R&D verification
- Pre-connection verification of storage converters
Especificaciones
| Voltage range | 0–1000V |
|---|---|
| Current range | 0–3000A |
| Frequency | 50/60Hz |
| Power | 0–2000kW |
| Short-circuit ratio | SCR 1.0–10 configurable |
¿Necesita una configuración y presupuesto para su equipo? Nuestros ingenieros responden en un día laborable.
Consultar este productoProductos relacionados
Uses precision RLC loads to simulate islanding after grid failure, verifying that grid-tied inverters and storage converters detect islanding and disconnect reliably.
Bancos de carga RLC propios de AC 400 V–13,8 kV y hasta 10.000 kW para ensayos de rendimiento y envejecimiento de gensets, SAI, inversores FV y PCS.
Computer-based test system with a PLC control core and high-speed data acquisition for steady-state, transient, continuous-operation and harmonic testing of generator sets.