Weak Grid Test Fixture
Simulates weak-grid conditions such as high network impedance, voltage/frequency fluctuation and three-phase imbalance to verify the grid adaptability of inverters and converters.
製品概要
The weak grid test fixture is a special testing device that simulates weak-grid conditions such as high distribution-network impedance, voltage/frequency fluctuation and three-phase imbalance, verifying the grid-connected adaptability of inverters and converters. It is mainly used for pre-grid-connection compliance testing and R&D verification of new-energy equipment, and can set different ratios of short-circuit capacity to equipment capacity (SCR = 1.0–10) to reproduce a low-SCR grid environment.
用途
- Compliance testing of new-energy grid-connected equipment
- Inverter weak-grid adaptability R&D verification
- Pre-connection verification of storage converters
仕様
| Voltage range | 0–1000V |
|---|---|
| Current range | 0–3000A |
| Frequency | 50/60Hz |
| Power | 0–2000kW |
| Short-circuit ratio | SCR 1.0–10 configurable |
ご使用機種に合わせた構成と見積が必要ですか？試験エンジニアが1営業日以内に回答します。
この製品を問合せ関連製品
Uses precision RLC loads to simulate islanding after grid failure, verifying that grid-tied inverters and storage converters detect islanding and disconnect reliably.
AC 400V–13.8kV、最大10,000kWの自社開発RLC負荷装置。発電機、UPS、PVインバーター、蓄電PCSの試験に対応。
Computer-based test system with a PLC control core and high-speed data acquisition for steady-state, transient, continuous-operation and harmonic testing of generator sets.